2024 Workday Photos
The Springfield Telescope Makers spend a lot of time maintaining and improving our site and facilities every year. We repair damage to roads and fields, maintain and improve buildings, observatories and telescopes, repair and improve equipment, and of course get ready for and host the annual Stellafane Convention. We are grateful to the many volunteers who help us with this work.
In 2024, Tom Spirock again documented much of this work with photographs, and this page is the result of that effort.
Credits: All photos were taken by STM member Tom Spirock, who spends a lot of time at workdays and gets a lot done including snapping a lot of photos.
All images are Copyright ©2024 The Springfield Telescope Makers, Inc.
 |
Bob Trzcinski explaining the Foucault test at the 2024 NEAF. |
 |
Cecilia Detrich explaining the mirror making process at the 2024 NEAF. |
 |
A young mirror maker at the 2024 NEAF. |
 |
A young mirror maker at the 2024 NEAF. |
 |
Bob Trzcinski explaining the mirror making process at the 2024 NEAF. |
 |
Bob Trzcinski explaining the mirror making process at the 2024 NEAF. |
 |
STM members at the 2024 NEAF. |
 |
Bob Trzcinski explaining the mirror making process at the 2024 NEAF. |
 |
Testing a mirror at the 2024 NEAF. |
 |
Eli Goldfine (right) explaining the mirror making process at the 2024 NEAF. |
 |
Mark Sproul (left) talking about 3D printing telescope tubes at the 2024 NEAF. |
 |
Roger Williams explaining the mirror making process at the 2024 NEAF. |
 |
Cecilia Detrich (left) talking about Stellafane at the 2024 NEAF. |
 |
A young mirror maker at the 2024 NEAF. |
 |
Larry Glasheen explaining the mirror making process at the 2024 NEAF. |
 |
Dave Kelly explaining the mirror making process at the 2024 NEAF.at the 2024 NEAF. |
 |
Roger Williams testing a mirror at the 2024 NEAF. |
 |
Dave Kelly testing a mirror at the 2024 NEAF. |
Back to the Member's Activities Page.